Technické specifikace

Poskytuje podrobné technické údaje a výkonnostní ukazatele pro každý nevýbušný výrobek a zajišťuje shodu s průmyslovými normami.

V jakých pracovních podmínkách se používá nevýbušná úroveň Bt4?

2024-07-10 Technické specifikace

Class IIB is suitable for environments where explosive mixtures of IIB gases and air occur. [table id=108 /] Explosion-proof classifications are split into primary levels for mining and secondary levels for factories. Within the secondary level, sub-classifications include IIA, IIB, and IIC, in ascending order of explosion-proof capability: IIA <...

Přečtěte si více
Which Explosion-Proof Level Is Higher, BT4 or CT6

2024-07-10 Technické specifikace

The BT4 model is classified under Explosion-proof Class B with a temperature rating of T4, stipulating that the equipment's surface temperature cannot exceed 135°C. [table id=216 /] Conversely, the CT6 model holds a Class C explosion-proof rating, covering the requirements of BT4 and applicable to zones with dangerous gases like...

Přečtěte si více
The Difference Between Explosion-Proof Level BT6 and BT4

2024-07-10 Technické specifikace

The 'B' classification denotes the approved level of equipment for handling gases and vapors within a facility, typically used for substances like ethylene, dimethyl ether, and coke oven gas. [table id=163 /] The 'T' category specifies temperature groups, where T4 equipment has a maximum surface temperature of 135°C, and T6...

Přečtěte si více
The Difference Between Explosion-Proof Level AT6 and BT4

2024-07-10 Technické specifikace

The explosion-proof rating for Zone A is lower than that for Zone B; however, the temperature class T6 exceeds T4. Consequently, it is not appropriate to claim that one has a higher explosion-proof level than the other. [table id=216 /] It is more accurate to state that each is tailored...

Přečtěte si více
The Difference Between Explosion-Proof Level AT4 and BT4

2024-07-10 Technické specifikace

Both categories maintain a T4 temperature classification, thus the distinction arises between Zone A and Zone B. Explosion-proof rating BT4 exceeds that of AT4. [table id=165 /] There is a substantial difference between Class ⅱa and Class ⅱb. Class ⅱb, the higher tier, is typically designated for fuels like gasoline,...

Přečtěte si více

V jakých pracovních podmínkách se používá nevýbušná úroveň Bt4?

Which Explosion-Proof Level Is Higher, BT4 or CT6

The Difference Between Explosion-Proof Level BT6 and BT4

The Difference Between Explosion-Proof Level AT6 and BT4

The Difference Between Explosion-Proof Level AT4 and BT4