Tekniske specifikationer

Giver detaljerede tekniske data og præstationsindikatorer for hvert eksplosionssikkert produkt, hvilket sikrer overholdelse af industristandarder.

Hvilket eksplosionssikkert niveau er højest, CT4 eller CT5?

2024-06-06 Tekniske specifikationer

Exd IIC T4 and Exd IIC T5 share similar explosion-proof ratings, with the sole distinction being the maximum temperature each can reach during operation. [table id=163 /] The maximum permissible surface temperatures differ: for Exd IIC T4, it is 135 degrees Celsius, whereas for Exd IIC T5, it is capped...

Læs mere om det
Hvad er forskellen mellem de eksplosionssikre niveauer IIIB og IIIC?

2024-06-05 Tekniske specifikationer

IIIB and IIIC both serve as classifications for explosion-proof electrical equipment in dusty settings, with IIIC ranking above IIIB. [table id=280 /] In environments categorized as IIIA, IIIB, or IIIC, IIIC locations pose the greatest risk. IIIC explosion-proof servo motors are appropriate for use in IIIB dust environments, whereas IIIB...

Læs mere om det
Forskellen mellem eksplosionssikkert niveau IIC og IIB

2024-06-05 Tekniske specifikationer

Explosion-proof classifications are divided into IIA, IIB, and IIC, with IIC being the highest level, followed by IIB and IIA. [table id=165 /] Recently, a customer inquired about our company's explosion-proof classifications. I confirmed it was IIC. When she asked if it met the IIB requirements she needed, I assured...

Læs mere om det
Eksplosionssikkert niveau CT4 og CT6

2024-06-05 Tekniske specifikationer

CT4 and CT6 indicate operational surface temperatures, not the withstand temperatures, for explosion-proof products. Products classified under the T6 category provide enhanced safety due to their lower operational surface temperatures compared to the T4 category. [table id=163 /] The CT4 explosion-proof motor carries an Exd IIC T4 rating and is...

Læs mere om det
Hvilket niveau af eksplosionssikkerhed er højest, IA eller D?

2024-06-05 Tekniske specifikationer

The flameproof designation "d" aligns with the EPL Gb category, which is appropriate only for gas environments in Zones 1 and 2; [table id=279 /] The intrinsic safety designation "ia" is associated with the highest level, EPL Ga, covering gas environments in Zones 0, 1, and 2; Hence, the intrinsic...

Læs mere om det

Hvilket eksplosionssikkert niveau er højest, CT4 eller CT5?

Hvad er forskellen mellem de eksplosionssikre niveauer IIIB og IIIC?

Forskellen mellem eksplosionssikkert niveau IIC og IIB

Eksplosionssikkert niveau CT4 og CT6

Hvilket niveau af eksplosionssikkerhed er højest, IA eller D?