Tehnilised andmed

Esitab üksikasjalikud tehnilised andmed ja toimivusnäitajad iga plahvatuskindla toote kohta, tagades vastavuse tööstusstandarditele.

LED plahvatuskindla valguse struktuurne vorm

2023-11-20 Tehnilised andmed

The design of explosion-proof lighting fixtures must be tailored to the specific zone and area of explosive gas environments. For instance, in Zone 1 areas, flameproof (explosion-proof) lighting fixtures are mandatory; in Zone 2, both flameproof and increased-safety fixtures can be used for fixed lighting, while portable lighting must be...

Loe edasi
Tuuled suurema ohutuse tagamiseks elektriseadmed

2023-11-18 Tehnilised andmed

In enhanced-safety electrical equipment, such as explosion-proof motors, transformers, electromagnetic wires, and ballasts for fluorescent lamps, a portion includes internal windings. The requirements for these windings, both mechanically and electrically, are higher than those for standard windings. Generally, the insulated wire used for winding these coils should be double-insulated, and...

Loe edasi
Tahked isolatsioonimaterjalid suurema ohutuse tagamiseks Elektriseadmed

2023-11-18 Tehnilised andmed

Based on the Comparative Tracking Index (CTI), solid insulation materials used in enhanced-safety electrical equipment can be classified into three levels: I, II, and IIa, as shown in Table 1.9. According to the GB/T 4207-2012 "Methods for the Determination of the Electrical Tracking Indices of Solid Insulating Materials," a grading...

Loe edasi
Suurenenud ohutus elektriseadmete juhtme ühendus

2023-11-18 Tehnilised andmed

For enhanced-safety electrical systems, wiring connections can be categorized into external electrical connections (where external cables enter the enhanced-safety enclosure) and internal electrical connections (between components inside the enclosure). Both types of connections typically utilize copper-core cables due to their high mechanical strength, low resistance, and superior conductivity. External Electrical...

Loe edasi
Suurendatud ohutus elektriseadmete kaitsekorpus

2023-11-18 Tehnilised andmed

Enhanced-safety electrical equipment must be encased in a properly designed enclosure. This casing is crucial not only for assembling electrical components but also for shielding them from external threats such as solid particles, moisture, and water. These elements pose a serious risk as they can lead to short circuits, insulation...

Loe edasi

LED plahvatuskindla valguse struktuurne vorm

Tuuled suurema ohutuse tagamiseks elektriseadmed

Tahked isolatsioonimaterjalid suurema ohutuse tagamiseks Elektriseadmed

Suurenenud ohutus elektriseadmete juhtme ühendus

Suurendatud ohutus elektriseadmete kaitsekorpus