Technical Specifications | Product Encyclopedia

Provides detailed technical data and performance indicators for each explosion-proof product, ensuring compliance with industry standards.

Which Explosion-Proof Level Is Higher, CT4 or CT5

2024-06-06 Spécifications techniques

Exd IIC T4 and Exd IIC T5 share similar explosion-proof ratings, with the sole distinction being the maximum temperature each can reach during operation. [table id=163 /] The maximum permissible surface temperatures differ: for Exd IIC T4, it is 135 degrees Celsius, whereas for Exd IIC T5, it is capped…

En savoir plus
What is the difference between explosion-proof levels IIIB and IIIC

2024-06-05 Spécifications techniques

IIIB and IIIC both serve as classifications for explosion-proof electrical equipment in dusty settings, with IIIC ranking above IIIB. [table id=280 /] In environments categorized as IIIA, IIIB, or IIIC, IIIC locations pose the greatest risk. IIIC explosion-proof servo motors are appropriate for use in IIIB dust environments, whereas IIIB…

En savoir plus
The Difference Between Explosion-Proof Levels IIC and IIB

2024-06-05 Spécifications techniques

Explosion-proof classifications are divided into IIA, IIB, and IIC, with IIC being the highest level, followed by IIB and IIA. [table id=165 /] Recently, a customer inquired about our company's explosion-proof classifications. I confirmed it was IIC. When she asked if it met the IIB requirements she needed, I assured…

En savoir plus
Explosion-Proof Level CT4 and CT6

2024-06-05 Spécifications techniques

CT4 and CT6 indicate operational surface temperatures, not the withstand temperatures, for explosion-proof products. Products classified under the T6 category provide enhanced safety due to their lower operational surface temperatures compared to the T4 category. [table id=163 /] The CT4 explosion-proof motor carries an Exd IIC T4 rating and is…

En savoir plus
Quel est le niveau de protection antidéflagrante le plus élevé, IA ou D ?

2024-06-05 Spécifications techniques

The flameproof designation "d" aligns with the EPL Gb category, which is appropriate only for gas environments in Zones 1 and 2; [table id=279 /] The intrinsic safety designation "ia" is associated with the highest level, EPL Ga, covering gas environments in Zones 0, 1, and 2; Hence, the intrinsic…

En savoir plus

Spécifications techniques

Which Explosion-Proof Level Is Higher, CT4 or CT5

What is the difference between explosion-proof levels IIIB and IIIC

The Difference Between Explosion-Proof Levels IIC and IIB

Explosion-Proof Level CT4 and CT6

Quel est le niveau de protection antidéflagrante le plus élevé, IA ou D ?