Shenhai Explosion-Proof
Explosion-proof hluav taws xob khoom kuj yog ib qho khoom indispensable khoom nyob rau hauv cov lag luam ua hauj lwm, Ua si ib tug tseem ceeb heev tseem ceeb heev nyob rau hauv peb txhua hnub kev tiv thaiv. Nws yog ib qho tseem ceeb heev uas yuav tau tsim kom muaj cov li tswj lawv excellent explosion-proof kev kawm. Ntxiv rau cov khoom hluav taws xob fais fab tuag, Lub maintenance ntawm explosion-proof li yuav tsum tau xav txog lawv cov cim xeeb ceem.
1. Tej yam yuav tsum tau ua:
1. txhua hom tawg-proof fais fab tuag yuav tsum ntxuav tu kom huv si. plua plav, Av, Thiab khib nyiab rau thiab nyob ib ncig ntawm cov khoom thiab cables yuav tsum tau tu kom huv si.
2. Tiv thaiv tag nrho explosion-proof hluav taws xob khoom los nag, daus, xuab zeb erosion; Xav txog installing tiv thaiv li tiv thaiv tej hais.
2. Kev Soj Ntsuam Xyuas Cov Neeg Ua:
1. Ensure all explosion-proof electrical equipment is securely installed; regularly check all fasteners to prevent loosening.
2. If hauv pem teb and equipotential connections become loose or corroded, tighten them immediately and/or perform rust removal and protection.
3. Operational Status:
1. Regularly check and adjust the working voltage, tam sim no, and frequency of the explosion-proof electrical equipment.
2. Listen for unusual operational sounds and observe vibration states and protective device actions. Address any abnormalities promptly.
3. Keep track of the lubrication status of moving parts, replenish lubricants timely, and regularly clean or replace bearings.
4. Regularly monitor the surface and environmental temperatures of the equipment. If abnormal, inspect for loose electrical contacts or wear on moving parts and address immediately.
5. Monitor load changes and make appropriate adjustments.
4. Electrical Insulation Status:
Regularly check the insulation resistance of explosion-proof pressurized cabinets and electrical systems.
5. Cable Inspection:
Routinely check cables, especially flexible ones, for damage. Replace them immediately if damaged.
6. Inspection and Repair:
1. Ensure the integrity of the explosion-proof electrical equipment’s casing; replace the equipment if there are any cracks in the casing.
2. If any abnormalities occur during use, conduct a thorough inspection and make on-site adjustments to restore normal operation. If on-site adjustments fail, dismantle and send the equipment for repair.
The above points are crucial for the routine maintenance and care of explosion-proof electrical equipment. txuas ntxiv, refer to the specific manuals for each type of explosion-proof device and strictly follow the prescribed maintenance procedures to ensure optimal explosion-proof performance. For any questions or repair issues, consult with Shenhai Explosion-Proof, where professional staff offer free consultations.