Yoqilg'i quyish shoxobchalarida portlashdan himoyalangan LED chiroqlarining kuchini tanlashning asosiy nuqtalari

Yoqilg'i quyish shoxobchalarida portlashdan himoyalangan LED yoritgichlar uchun maqbul quvvatni aniqlash, shu bilan birga tejamkor va bardoshli bo'lish uchun etarli darajada yorqinlikka erishish ko'pchilik uchun qiyin bo'lishi mumkin.. Internetda ko'plab so'rovlar va turli tushuntirishlar bilan, here’s a simplified guide to making the right choice:

Asosiy mulohazalar:

Birinchidan, tushunish muhim that solely focusing on wattage is misleading. Different brands offer varying brightness and beam angles at the same wattage. Masalan; misol uchun, while the general market brightness is around 90 Lumens per Watt (LM/W), our company’s LED canopy lights offer 120-150 LM/W. Shuning uchun, a 100-watt light typically provides 9,000 Lumens (90 LM/W x 100W), lekin our lights offer 12,000 Lumens (120 LM/W x 100W), qaysi 30% brighter.

Ikkinchidan, avoid LED gas station lights that cause glare or dazzle. Masalan; misol uchun, lights with integrated large LED bulbs can be overwhelming and unsuitable for gas stations, compromising the safety of vehicles entering the station. Lights that cause side glare should also be avoided as their distribution is not suitable for gas stations and can affect drivers.

These insights are from a professional standpoint. Biroq, most people choose lights based on their budget. Shunday qilib, let’s discuss from a traditional perspective. Gas stations typically have

varying heights:

Small gas stations (4-5 meters high): We recommend 100-watt explosion-proof lights installed symmetrically over the fueling lanes and islands.

Traditional gas stations (atrofida 6 meters high): Opt for 150-watt LED canopy lights, installed over the fueling lanes and islands symmetrically.

Large gas stations (haqida 8 meters high): It’s advisable to use 200-watt fixtures, installed over the fueling lanes and islands.

This traditional method can be adjusted based on installation density and brightness requirements. Lower wattages can be used for higher installation densities, and vice versa for higher brightness demands.