防爆接線盒嘅安裝注意事項

防爆接線盒已成為現代工業環境中熟悉且必不可少的配電設備, 主要用于整合和發散電路. With the rapid advancement of today’s society, 傳統嘅接線盒已無法滿足工廠環境嘅嚴格要求, 把防爆接線盒作為標準要求.

安裝指南:

1. Compliance Check: 安裝前, verify that the technical parameters on the 防爆接線盒 comply with national explosion-proof standards and that the labeled specifications match your practical requirements.

2. Inspection of Reinforcements: Prior to installation, thoroughly inspect all reinforcing components within the box for any looseness. If any components require tightening or are unable to be secured, halt the installation process.

3. Secure Cable Connections: When connecting wires and cables, ensure to use sealing rings and metal washers, tightened with compression nuts for a firm and secure seal. Unused connection ports must be properly sealed using sealing rings and metal spacers.

4. Safety First in Maintenance: Always ensure that the power supply is turned off before opening the junction box for maintenance. Avoid opening the box while it is energized to prevent electrical hazards.

These guidelines aim to assist in the effective and safe installation of our explosion-proof junction boxes, ensuring operational efficiency and safety in industrial environments.